TSC – cutting and stripping machines

TSC are automatic cut and strip machines that enables the processing of many different  wires ...

TSC – cutting and stripping machines

TSC are automatic cut and strip machines that enables the processing of many different  wires in a quick, precise and safe way by using a keyboard.
The whole range starts from the simple cutting machine TSC able to cut soft material (such as ropes, cables, sheaths, tubes, leather, Teflon etc.) up to 25mm of width (flat material) or with 10mm max. of diameter, until arriving to the electronic cutting and stripping machines TSC2,5 – TSC8 – TSC16 – TSC25 – TSC35 – TSC50 which can process unipolar cables with sections from 0.1 mm² to 50mm² and multipolar cables up to 18mm of diameter.
Through TSC machines you can make total, partial or middle stripping on electric cables, saving until 99 codes. MGR ELECTRO provides with the machines some interchangeable thread guides that allow the precise sliding of the cable. There is also the possibility to change the stripping blades that easily and precisely allow to switch from round to flat cables. TSC machines are equipped with all the safety requirements and they are compliant with CE regulations.

› TABLE WITH 7 TSC

TECHNICAL FEATURES OF 7 MODELS:

TSC

TSC is an electric cutting machine (only 230V supply) that allows you to cut to length sheaths, cables and tubes, managing everything from the keyboard in a very simple way.

Blades (flat, guillotine or V) and appropriate wire guides allow to obtain the desired cutting of different types of materials.

Put in line with the unwinder EASY UNROAL it also allows the smooth progress of the material to be processed (stored in coils or skeins), making the working process completely automatic.

TECHNICAL FEATURES
– Power supply voltage: 230V / 50Hz (1P + N)

- Total nominal power: 200W

– Breaking capacity: 6 KA
- Voltage control circuit: 24Vdc

– Class of protection against indirect contact: I

– Degree of solids and liquids declared protection: IP20

- Weight: 33 kg

– Dimensions: 390mm x 350mm x 235mm

– Display: LCD screen Liquid Crystal Display

– Cutting length: 1mm ÷ 9.999mm

– Cutting tolerance: ≤ 0.002xL (L = length of cut)

– Blade Material: High quality Tungsten
– Pieces produced per hour: 3.000 ÷ 10.000 pcs / h

– Degree of mobility: Transportable Equipment

– Connection to the mains supply: Connector jack panel

TSC2,5

TSC2,5 is an electronic cut and strip machine that allows the cutting and stripping (or middle stripping) on both sides of single-core cables from 0.1 to 2.5 mm².

You can enter and manage from the keyboard up to 99 programs with different lengths, sections and cable processing and which can be recalled when you need.

TSC2,5 lends itself to precise processing of cables with limited dimensions and it’s equipped with interchangeable thread-guides to be used depending on the external dimensions of the cables.

TECHNICAL FEATURES
– Power supply voltage: 230V / 50Hz (1P + N)

- Total nominal power: 160W

- Breaking capacity: 6 KA

- Voltage control circuit: 24Vdc

- Class of protection against indirect contact: I

- Degree of solids and liquids declared protection: IP20

– Weight: 33 kg

– Dimensions: 390mm x 350mm x 235mm

– Display: LCD screen Liquid Crystal Display

– Cutting length: 1mm ÷ 9.999mm

– Cutting tolerance: ≤ 0.002xL (L = length of cut)
– Stripping Cable: Head 0 ÷ 35mm, Tail 0 ÷ 15 mm
– Section: 0.1 to 2.5 mm²
– Maximum internal diameter of the thread guides: 6mm
– Middle stripping: 11

– Blade Material: High quality Tungsten

- Pieces produced per hour: 3.000 ÷ 8.000 pcs / h

- Degree of mobility: Transportable Equipment

- Connection to the mains supply: Connector jack panel

TSC8

The possibility of working a wide range of cables (single-pole, multi-pole, flat plates) of different sizes and to cut tubes to size etc. make TSC8 the most versatile electronic cut and strip machine on the market.

As with the smaller model TSC2,5 and the greater one TSC16 you have the option of storing up to 99 programs with different lengths, sections and wire processing and which can be recalled when you need.

Equipped with 3 interchangeable wire guide, if accompanied with appropriate blades and wire guides TSC8 can switch from working round cables to processing flat cable in a very easy and quick way.

TECHNICAL FEATURES
– Power supply voltage: 230V / 50Hz (1P + N)

– Total nominal power: 300W

– Breaking capacity: 6 KA

- Voltage control circuit: 24Vdc

- Class of protection against indirect contact: I

– Degree of solids and liquids declared protection: IP20

– Weight: 36 kg
– Dimensions: 390mm x 350mm x 235mm

– Display: LCD screen Liquid Crystal Display

– Cutting length: 1mm ÷ 9.999mm

– Cutting tolerance: ≤ 0.002xL (L = length of cut)
– Stripping Cable: Head 0 ÷ 50mm, Tail 0 ÷ 50 mm
– Section: 0.1 to 8 mm²
– Maximum internal diameter of the thread guides: 8mm
– Middle stripping: 10

– Blade Material: High quality Tungsten
– Pieces produced per hour: 3.000 ÷ 8.000 pcs / h

– Degree of mobility: Transportable Equipment

- Connection to the mains supply: Connector jack panel

TSC16

The typical features of TSC16 allow the processing of unipolar cables with large sections (up to 25mm²) and permit to obtain considerable stripping of multi-core cables up to 13 mm in diameter (only by managing a machine parameter that allows middle-stripping).
The possibility to interface TSC16 to our deposit system HTX and to our unwinder UNROAL allows to unwind, process in automated mode and store cables with a considerable length by managing everything from the keyboard.


TECHNICAL FEATURES
– Power supply voltage: 230V / 50Hz (1P + N)
– Total nominal power: 450W

- Breaking capacity: 6 KA

- Voltage control circuit: 24Vdc

- Class of protection against indirect contact: I
– Degree of solids and liquids declared protection: IP20

– Weight: 40 kg

– Dimensions: 420mm x 390mm x 280mm

– Display: LCD screen Liquid Crystal Display

- Cutting length: 1mm ÷ 9.999mm

– Cutting tolerance: ≤ 0.002xL (L = length of cut)
– Stripping Cable: Head 0 ÷ 150mm, Tail 0 ÷ 100 mm
– Section: 0.2 to 25 mm²
– Maximum internal diameter of the thread guides: 13mm
– Middle stripping: 13

– Blade Material: High quality Tungsten

– Pieces produced per hour: 3.000 ÷ 5.000 pcs / h

– Degree of mobility: Transportable Equipment

– Connection to the mains supply: Connector jack panel

TSC25

The TSC25 is the evolution of the TCS16. It offers the possibility of processing cables up to 100 meters in length, easily setting the cutting and stripping of cables under 30 mm (short mode) and the possibility, as in photos and videos, to work 3 different layers of insulation (multilayer).

TECHNICAL FEATURES
– Power supply voltage: 230V / 50Hz (1P + N)
– Total rated power: 400W
– Interruption power: 6 KA
– Control circuit voltage: 24Vdc
– Class of protection against indirect contacts: I
– Degree of protection of solid and liquid bodies declared: IP20
– Year of construction: 2018
– Weight: 40 Kg
– Dimensions: 420mm x 515mm x 345mm
– Display: Liquid Crystal Display LCD Screen
– Cutting length: 0.1m ÷ 100m
– Cutting tolerance: ≤ 0.002xL (L = cutting length)
– Cable stripping: Head 0 ÷ 150mm – Unlimited with multiple stripping function, Tail 0 ÷ 150mm – Unlimited with multisection method
– Section: 0.5 ÷ 25 mmq unipolar
– Maximum internal diameter of thread guides: 12mm
– Intermediate stripping: 13
– Blade material: Special steel
– Stripping speed: 4,000 ÷ 5,000 pcs / h L = 100mm
– Degree of mobility: Transportable Equipment
– Connection to the power supply: Panel connector socket

TSC35

TSC35 is a wire cutting and stripping machine of latest generation for cutting unipolar cables up to 35 mm² and multipolar cables up to 15 mm in external diameter. The particularity of the opening of rollers (pneumatically) of the cable outlet during the head stripping phase allows TSC35 to get to make unlimited sheath stripping in a very precise and easy way.

TECHNICAL FEATURES
– Power supply voltage: 230V / 50Hz (1P + N)
– Total rated power: 800W
– Interruption power: 6 KA
– Control circuit voltage: 24Vdc
– Class of protection against indirect contacts: I
– Degree of protection of solid and liquid bodies declared: IP20
– Year of construction: 2018
– Weight: 40 Kg
– Dimensions: 420mm x 515mm x 345mm
– Display: Liquid Crystal Display LCD Screen
– Cutting length: 0.1m ÷ 100m
– Cutting tolerance: ≤ 0.002xL (L = cutting length)
– Cable stripping: Head 0 ÷ 150mm, Tail 0 ÷ 150mm – Unlimited with multisection method
– Section: 0.5 ÷ 35 mmq unipolar
– Maximum internal diameter of thread guides: 18mm
– Intermediate stripping: 13
– Blade material: Special steel
– Stripping speed: 4,000 ÷ 5,000 pcs / h L = 100mm
– Degree of mobility: Transportable Equipment
– Connection to the power supply: Panel connector socket

TSC50

TSC50 is a wire cutting and stripping machine for unipolar and multipolar cables of big dimensions.
The machine is equipped with a series of thread guides that are easily interchangeable and which allow you to manage and work (cut to lenght, unsheathe or strip) unipolar cables up to 50mm2 of section and multipolar cables up to 18mm in outer diameter.
The TSC50 software allows you to cut and strip unipolar cables on both sides, while on multipolar cables you can remove the external insulation (with big removal lengths) and strip the internal conductors.

TECHNICAL FEATURES
– Volt: 230V/50Hz (1P + N)
– Power: 1000W
– Weight: 85 Kg
– Dimensions: 420mm x 515mm x 345mm
– Display: Schermo LCD Liquid Crystal Display
– Cutting lenght: 0,1m ÷ 100m
– Cutting tolerance: ≤ 0.002xL ( L= cutting lenght)
– Cable stripping: Head 0 ÷ 150mm, Tale 0 ÷ 150mm – Unlimited with multisection method
– Cable section: 2.5 ÷ 70 mm2 unipolar
– Maximum inside diameter of wire guides: 18mm
– Middle stripping: 13
– Material of blades:: Steel
– Stripping speed: 2.000 ÷ 5.000 pcs/h L=100mm
– Connection to the pneumatic network: PVC pipe 8mm

Other products